
Trek PZD2000A
High-Bandwidth, High Voltage Amplifier, Output Voltage 0 to ±2 kV DC or Peak A
Advanced Energy’s high-bandwidth Trek PZD2000A high voltage power amplifier is used for precision high power applications.
- Output Voltage Range: 0 to ±2 kV DC or Peak AC
- Output Current Range: 0 to ±200 mA DC or ±400 mA Peak AC
- Slew Rate: Greater than 750 V/µs
- Large Signal Bandwidth: DC to greater than 60 kHz (3% distortion):
- Gain: 200 V/V
Tải Catalog
Overview
The Trek® PZD2000A high voltage power amplifier incorporates an all-solid-state design for high reliability and low-noise operation. Its four-quadrant output stage sinks and sources the load current throughout the output voltage range. This enables accurate output responses and high slew rates into highly capacitive loads. The output stage is fully protected against over-voltage and over-current conditions generated by active loads, overloads, or arcing to the ground.
Benefits
Use remote high voltage on/off with automated or computer-controlled systems
Adjust current limit or trip level
Optimize the AC response for various load parameters
Use in dielectric material characterization, polymer and ceramic corona poling, and piezoelectric driving and control applications
Benefit from the all-solid-state design
Features
DC accuracy is better than 0.1% of full-scale
NIST-traceable calibration certificate provided with each unit
Precision voltage and current monitors provide buffered low voltage representations of the high-voltage output and load current for monitoring purposes or use as feedback signals in closed-loop systems
Output stage fully protected against over voltage and over current conditions generated by active loads, overloads, or arcing ground